Product Information








Join our mailing list!


You are here: Home > Preferred Knots

Preferred Knots

InvisaSwivel

Clinch Knot Instructions

  • Pass the line through the eye of the swivel leaving several inches of line to work with.
  • Double back. Twist four to five turns around the line.
  • Pass the end of the line through the first loop near the eye. To tighten, pull on swivel and line simultaneously.
  • Pull only as hard as the swivel is rated for.
  • TIP: There are groves near the eye of the swivel. Make sure the line is seated into the grooves so the line comes straight off the swivel.

Knot2Kinky Wire

Perfection Loop


Clinch Knot Instructions
  • Pass the line through the eye of the swivel leaving several inches of line to work with.
  • Double back. Twist four to five turns around the line.
  • Pass the end of the line through the first loop near the eye. To tighten, pull on swivel and line simultaneously.
  • Pull only as hard as the swivel is rated for.
  • TIP: There are groves near the eye of the swivel. Make sure the line is seated into the grooves so the line comes straight off the swivel.



Albright Knot Instructions
  • Purpose: To tie a mono/Fluoro line directly to Knot2Kinky wire.
  • Form a loop in the Knot2Kinky wire. Pass the end of the other line through the loop and wrap it neatly around itself and the two lines of the loop ten times.
  • Then pass the end back through the loop the same way it entered.
  • Lubricate, pull the knot tight and clip the tag ends.